Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Teflon tape
- Air hose
Step-by-Step Installation
- Choose Installation Location: Select a clean, dry, well-ventilated area with adequate clearance for air flow and maintenance access.
- Unpack and Inspect: Remove all packaging materials and inspect for any shipping damage. Check all components against packing list.
- Position Compressor: Place on a flat, stable surface. Ensure unit is level to prevent oil leakage and uneven wear.
- Oil Check: Check oil level in pump. Add compressor oil if necessary (SAE 30 non-detergent).
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A outlet. Use dedicated circuit if possible.
- Air System Setup: Connect air hose to quick-connect coupler. Install air filter if not pre-installed.
- Pressure Settings: Adjust pressure regulator to desired output pressure (typically 90-120 PSI for most tools).
- Initial Run: Run compressor without load for 30 minutes to break in. Check for leaks and proper operation.
Specifications
| Model Number | CMEC6150 |
| Type | Pancake Air Compressor |
| Color | Red/Black |
| Tank Capacity | 2 Gallon |
| Motor Power | 1 HP (Running), 2 HP (Peak) |
| Noise Level | 78 dB |
| Max Pressure | 150 PSI |
| CFM at 90 PSI | 2.6 SCFM |
| CFM at 40 PSI | 3.5 SCFM |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 14 x 15 x 14 inches |
| Weight | 30 lbs |
| Pump Type | Oil-lubricated |
Warranty Information
- Full Warranty: 1 year limited warranty
- Pump Warranty: 2 years on compressor pump
- Tank Warranty: Lifetime limited warranty
- Additional Coverage: Extended warranty available at purchase
For warranty service, contact Craftsman Customer Service at 1-888-331-4569 or visit Craftsman.com
Key Features
Pancake Tank Design
Low-profile pancake tank provides stability and space efficiency while offering 2 gallons of air storage for continuous tool operation.
Oil-Lubricated Pump
Durable oil-lubricated pump ensures longer life, quieter operation, and better heat dissipation compared to oil-free models.
ASME Certified Tank
Tank meets ASME safety standards with automatic pressure release valve for safe operation under all conditions.
Quick-Change Accessories
Integrated quick-connect coupler allows fast tool changes without tools. Includes 25-foot rubber air hose.
Easy-Read Gauges
Dual gauges clearly display tank pressure and regulated output pressure for precise control of air tools.
Portable Design
Compact size with built-in handle makes it easy to transport to job sites. Weighs only 30 pounds for maximum portability.