Installation Guide
Tools Needed:
- Adjustable wrench
- Screwdrivers (flat and Phillips)
- Pliers
- Teflon tape
- Pressure gauge
Step-by-Step Installation
- Choose Installation Location: Select a clean, dry, well-ventilated area on a solid, level surface away from flammable materials.
- Unpack and Inspect: Remove all packaging materials and inspect the compressor for any shipping damage.
- Oil Check: Check the oil level in the pump (if oil-lubricated model) and add recommended oil if necessary.
- Connect Air Hose: Attach the air hose to the compressor outlet using appropriate fittings and Teflon tape for sealing.
- Electrical Connection: Connect to a properly grounded 120V, 15A, AC outlet with correct circuit protection. Do not use an extension cord.
- Pressure Settings: Set the pressure regulator to the recommended PSI for your tools (typically 90-120 PSI).
- Initial Test Run: Run the compressor without load for 10-15 minutes to break in the pump and check for leaks.
Specifications
| Model Series | CMEC6150 |
| Type | Pancake Air Compressor |
| Color | Red/Black |
| Tank Capacity | 2 Gallons |
| Noise Level | 75 dB |
| Maximum Pressure | 150 PSI |
| SCFM at 90 PSI | 2.6 SCFM |
| Motor Type | Oil-Free Pump |
| Power Requirements | 120V, 15A, 60Hz |
| Dimensions (HxWxD) | 14 x 15 x 14 inches |
| Weight | 30 lbs |
| Hose Length | 25 feet |
Warranty Information
- Full Warranty: 1 year limited warranty
- Pump Warranty: 2 years on oil-free pump
- Additional Coverage: Optional extended warranty available
For warranty service, contact Craftsman Customer Service at 1-888-331-4569 or visit Craftsman.com
Key Features
Oil-Free Pump
Maintenance-free oil-free pump design eliminates the need for regular oil changes and provides reliable performance with minimal upkeep.
Pancake Tank Design
Low-profile pancake tank provides stability and easy storage while offering 2 gallons of air capacity for continuous tool operation.
150 PSI Maximum Pressure
Delivers 150 PSI maximum pressure for powering a wide range of air tools including nailers, staplers, inflators, and spray guns.
Quick Recovery Time
Fast recovery time allows for continuous operation of most finishing nailers and brad nailers without waiting for tank to refill.
Dual Quick-Connect Couplers
Two quick-connect couplers allow simultaneous operation of two tools or easy switching between different air tools.
Integrated Storage
Built-in storage compartments for air hose and accessories keep everything organized and ready for use.
Recommended Applications
Finishing Nailers
Ideal for trim work, crown molding, and finish carpentry
Brad Nailers
Perfect for delicate trim and small woodworking projects
Staplers
Great for upholstery, insulation, and wire securing
Inflators
Quick inflation of tires, sports equipment, and inflatables
Blow Guns
Cleaning dust from tools, workbenches, and projects
Small Spray Guns
Touch-up painting and small finishing projects
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Compressor won't start | Power issue, pressure switch fault, thermal overload | Check power supply, reset thermal overload, check pressure switch |
| Low air pressure | Air leak, worn piston rings, clogged air filter | Check for leaks, clean/replace air filter, inspect pump |
| Excessive noise/vibration | Loose components, worn bearings, improper mounting | Tighten all fasteners, check mounting surface, inspect bearings |
| Air leaks | Loose fittings, damaged hose, faulty check valve | Tighten connections, replace damaged hose, check valve |
| Overheating | Dirty cooling fins, inadequate ventilation, continuous operation | Clean cooling fins, improve ventilation, allow cool-down periods |
| Slow recovery time | Clogged intake filter, worn pump, leaking check valve | Clean air filter, check pump wear, inspect check valve |
Maintenance Schedule
- Daily: Drain moisture from tank, check for leaks
- Weekly: Clean air filter, check hose condition
- Monthly: Inspect safety valve, check belt tension (if applicable)
- Annually: Complete system inspection, replace worn components
- As Needed: Check oil level (if oil-lubricated model)
- Storage: Drain tank completely, store in dry location
Manual Downloads
Current Model Manuals
CMEC6150
2 Gallon Pancake Compressor
CMEC6250
3 Gallon Hot Dog Compressor
CMEC6350
6 Gallon Twin Stack Compressor
CMEC6450
4 Gallon Portable Compressor
Popular Previous Models
919.152061
2 Gallon Oil-Free Compressor
919.165380
3 Gallon Pancake Compressor
919.152071
4 Gallon Hot Dog Compressor
919.167380
6 Gallon Twin Stack Compressor