Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe thread sealant
Step-by-Step Installation
- Choose Installation Location: Select a clean, dry, well-ventilated location on a solid, level surface away from flammable materials.
- Check Oil Level: For oil-lubricated models, check and fill oil to proper level before first use (if applicable).
- Position Compressor: Place compressor on a stable surface, ensuring all four feet make contact and unit is level.
- Connect Air Hose: Attach air hose to compressor outlet using appropriate fittings. Apply thread sealant to connections.
- Electrical Connection: Connect to a properly grounded 120V, 15A, AC outlet with correct circuit protection. Use dedicated circuit if possible.
- Pressure Settings: Set pressure regulator to desired output pressure (typically 90-120 PSI for most tools).
- Initial Run: Open drain valve, turn on compressor, and allow to run for 10-15 minutes to break in. Close drain valve after initial run.
Specifications
| Model Series | CMEC6150 |
| Type | Portable Pancake Air Compressor |
| Color | Red / Black |
| Tank Capacity | 6 Gallon |
| Noise Level | 78 dB |
| Control Type | Manual Pressure Switch with Gauge |
| Motor Type | Oil-Free Pump |
| Max Pressure | 150 PSI |
| CFM at 90 PSI | 2.6 SCFM |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 19 x 18 x 19 inches |
| Weight | 52 lbs |
| Horsepower | 1.5 HP |
Warranty Information
- Full Warranty: 1 year limited warranty
- Pump Warranty: 2 years on oil-free pump
- Tank Warranty: 5 years on ASME certified tank
- Additional Coverage: Extended warranty available at purchase
For warranty service, contact Craftsman Customer Service at 1-888-331-4569 or visit Craftsman.com
Key Features
Oil-Free Pump
Maintenance-free oil-free pump design eliminates the need for regular oil changes, providing convenient operation with less maintenance required.
ASME Certified Tank
6-gallon ASME certified air tank provides reliable storage capacity for various pneumatic tools and applications with enhanced safety standards.
Pancake Design
Compact pancake design offers stable platform with low center of gravity, making it easy to transport and store while providing excellent stability during operation.
Quick Recovery Time
Fast recovery time allows for continuous operation of air tools, minimizing downtime and increasing productivity on job sites.
Dual Quick-Connect Couplers
Two quick-connect couplers allow simultaneous use of two air tools or accessories without the need for additional manifolds or splitters.
Integrated Storage
Built-in storage compartments for air hose and accessories keep everything organized and readily available when needed.
Recommended Applications
Framing Nailers
Ideal for 16d framing nails and construction applications
Finish Nailers
Perfect for trim work and finish carpentry projects
Brad Nailers
Suitable for delicate trim and cabinet work
Staple Guns
Great for upholstery and insulation projects
Inflating
Perfect for tires, sports equipment, and inflatables
Blowing
Effective for cleaning workshops and drying surfaces
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Compressor won't start | Power issue, pressure switch fault, thermal overload | Check power supply, reset thermal overload, check pressure switch |
| Low pressure output | Leaks, worn piston rings, faulty check valve | Check for air leaks, inspect check valve, test pump output |
| Excessive noise/vibration | Loose components, worn bearings, improper mounting | Tighten all fasteners, check mounting surface, inspect bearings |
| Overheating | Dirty cooling fins, restricted airflow, excessive cycling | Clean cooling fins, ensure proper ventilation, check duty cycle |
| Air leaks | Loose fittings, damaged hose, faulty drain valve | Tighten all connections, replace damaged components, check drain valve |
| Slow recovery time | Worn pump, intake filter clogged, leaking check valve | Clean intake filter, check pump condition, inspect check valve |
Maintenance Schedule
- Daily: Drain moisture from tank, check oil level (if applicable), inspect for leaks
- Weekly: Clean intake filter, check belt tension (if applicable), inspect hoses
- Monthly: Check safety valve operation, inspect electrical connections, clean cooling fins
- Annually: Replace air filter, check piston rings, inspect tank for corrosion
- As Needed: Replace worn parts, check motor brushes, service pressure switch
Manual Downloads
Current Model Manuals
CMEC6150
6 Gallon Pancake Compressor
CMEC6160
6 Gallon Hot Dog Compressor
CMEC6250
6 Gallon Twin Stack
CMEC6350
6 Gallon Wheelbarrow
Popular Previous Models
919.152411
6 Gallon Oil-Free
919.165380
6 Gallon Portable
919.167380
6 Gallon Contractor
919.152370
6 Gallon Pancake