Installation Guide
Tools Needed:
- Phillips screwdriver
- Level
- Wire strippers
- Drill with appropriate bits
- Voltage tester
Step-by-Step Installation
- Choose Installation Location: Select a location on an interior wall, approximately 1.5 meters above floor level, away from direct sunlight and heat sources.
- Turn Off Power: Ensure main power to the air conditioning system is turned off at the circuit breaker before beginning installation.
- Mount Backplate: Mark and drill holes for the controller backplate, ensuring it is level before securing with screws.
- Connect Wiring: Connect communication and power wires according to the wiring diagram provided with your Daikin unit.
- Attach Controller: Carefully snap the controller unit onto the mounted backplate until it clicks into place.
- Restore Power: Turn power back on at the circuit breaker and wait for the controller to initialize.
- Initial Setup: Follow on-screen prompts to set language, time, date, and connect to Wi-Fi if applicable.
Specifications
| Model Series | BRC1E Series / BRC4 Series |
| Type | Wall-mounted Air Conditioning Controller |
| Color | White / Titanium |
| Display | LCD Touch Screen / LED Display |
| Communication | Wired / Wi-Fi Enabled |
| Control Type | Touch Controls with LCD Display |
| Compatibility | Daikin VRV, FTX, RX Series |
| Power Requirements | 24V AC, 50/60Hz |
| Operating Temperature | 0°C to 50°C |
| Dimensions (HxWxD) | 86 x 86 x 15 mm |
| Weight | 120 g |
| Wire Length | 10 meters (standard) |
Warranty Information
- Full Warranty: 3 years parts and labor
- Extended Coverage: Optional 5-year warranty available
- Software Updates: Lifetime free updates via Daikin app
For warranty service, contact Daikin Customer Service at 1-800-432-1342 or visit Daikin.com
Key Features
Intelligent Eye
Built-in motion sensor detects room occupancy and automatically adjusts temperature settings to save energy when the room is unoccupied.
Wi-Fi Connectivity
Connect to your home network for remote control via smartphone app, allowing you to adjust settings from anywhere.
7-Day Programmable Timer
Set different temperature schedules for each day of the week to match your lifestyle and maximize energy savings.
Quiet Operation Mode
Special mode reduces fan speed and compressor noise for undisturbed sleep or quiet environments.
Energy Consumption Display
Real-time energy usage monitoring helps you track and reduce your air conditioning costs.
Auto Restart Function
Automatically resumes previous settings after a power outage, ensuring continuous comfort.
Operating Modes Explained
Cooling Mode
Standard air conditioning operation for hot days with adjustable temperature and fan speed
Heating Mode
Reverse cycle operation for winter heating with efficient heat pump technology
Dry Mode
Dehumidification function that removes excess moisture without overcooling the room
Fan Mode
Circulates air without heating or cooling, with multiple fan speed options
Auto Mode
Intelligent mode that automatically selects cooling or heating based on room temperature
Eco Mode
Energy-saving operation that optimizes performance for reduced power consumption
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller won't turn on | Power issue, wiring problem, circuit breaker tripped | Check power supply, verify wiring connections, reset circuit breaker |
| No communication with unit | Wiring issue, distance too far, incompatible system | Check communication wires, ensure within 500m range, verify compatibility |
| Wi-Fi connection failed | Network issues, incorrect password, signal strength | Check router settings, re-enter password, move router closer |
| Temperature inaccurate | Sensor placement, heat sources nearby, calibration needed | Relocate controller, avoid heat sources, recalibrate sensor |
| Display blank or dim | Power issue, backlight setting, display failure | Check power supply, adjust brightness settings, contact service |
| Buttons not responding | Touch panel issue, lock function enabled, software glitch | Clean screen, disable child lock, restart controller |
Error Codes
- E1: Room temperature sensor error - Check sensor connection
- E3: Communication error - Check wiring between controller and unit
- E5: Power supply error - Check voltage and wiring
- E6: Indoor unit error - Check indoor unit status
- E7: Outdoor unit error - Check outdoor unit status
- EA: Wi-Fi connection error - Check network settings
Manual Downloads
Current Model Manuals
BRC1E63
Wi-Fi Wall Controller
BRC4C52
Touch Screen Controller
BRC7D41
Advanced Zone Controller
BRC2F38
Basic Wall Controller
Popular Previous Models
BRC1D52
Standard Wall Controller
BRC3C41
LCD Display Controller
BRP1A42
Remote Controller
BRC2B35
Wired Controller