Installation Guide
Tools Needed:
- Adjustable wrench
- Screwdrivers (flat and Phillips)
- Measuring tape
- Window sealing kit (included)
- Level
Step-by-Step Installation
- Choose Installation Location: Place the unit on a flat, stable surface near a window and electrical outlet. Ensure proper clearance for air circulation.
- Prepare Window Kit: Measure your window and adjust the window sealing kit to fit. Secure the exhaust hose adapter to the window panel.
- Connect Exhaust Hose: Attach the exhaust hose to the unit's rear vent and secure it to the window kit adapter. Ensure all connections are tight.
- Install Window Panel: Place the window panel in the window opening and extend it to fit. Seal any gaps with the provided foam strips.
- Electrical Connection: Plug the unit into a dedicated 220-240V, 50Hz grounded outlet. Do not use extension cords or power strips.
- Drainage Setup: For continuous operation, connect the drain hose to the unit's drain outlet and route it to a suitable drainage point.
- Test Run: Turn on the unit and run it in cooling mode for 15 minutes to verify proper operation and check for air leaks.
Specifications
| Model Series | PAC EX130 / PAC AN110 |
| Type | Portable Air Conditioner |
| Color | White / Silver |
| Cooling Capacity | 12,000 BTU/h (3.5 kW) |
| Heating Capacity | 13,000 BTU/h (3.8 kW) - Heat Pump Models |
| Noise Level | 52 dB (Low Speed) |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | A+ (Cooling) / A (Heating) |
| Air Flow | 350 m³/h |
| Power Requirements | 220-240V, 50Hz, 10A |
| Dimensions (HxWxD) | 75 x 45 x 35 cm |
| Weight | 32 kg |
| Refrigerant | R290 (Eco-friendly) |
Warranty Information
- Full Warranty: 2 years parts and labor
- Compressor Warranty: 5 years on rotary compressor
- Extended Coverage: Optional 3-year extension available
For warranty service, contact DeLonghi Customer Service at 1-800-322-3848 or visit DeLonghi.com
Key Features
3-in-1 Functionality
Cooling, dehumidifying, and fan functions in one portable unit. Some models include heating capability for year-round comfort.
Auto Swing Louvers
Automatically oscillating louvers distribute air evenly throughout the room, eliminating hot spots and ensuring consistent temperature.
24-Hour Timer
Program the unit to turn on or off at specific times, helping to save energy and ensure comfort when you need it most.
Sleep Mode
Quiet operation with gradual temperature adjustment for optimal sleeping conditions. Fan speed automatically reduces for minimal noise.
Auto Evaporation System
Advanced condensation management system that re-evaporates most moisture through the exhaust, reducing the need for manual drainage.
Washable Air Filter
Removable and washable filter captures dust and particles, improving air quality and making maintenance simple and economical.
Operating Modes Explained
Cooling Mode
Standard air conditioning function with adjustable temperature settings from 16°C to 32°C
Dehumidify Mode
Removes excess moisture from the air without overcooling the room
Fan Mode
Circulates air with three speed settings without cooling or dehumidifying
Heat Mode
Reverse cycle heating function available on heat pump models
Auto Mode
Intelligently switches between cooling and fan modes to maintain set temperature
Turbo Mode
Maximum cooling power for rapid temperature reduction in hot conditions
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit won't start | Power issue, full water tank, timer set | Check power supply, empty water tank, check timer settings |
| Poor cooling performance | Dirty filter, room too large, exhaust hose blocked | Clean air filter, check room size, ensure exhaust hose is unobstructed |
| Water leakage | Drain plug not installed, unit not level | Install drain plug properly, level the unit, check drain hose connection |
| Unusual noises | Loose parts, foreign objects, uneven surface | Check for loose components, remove obstructions, place on level surface |
| Error code display | Sensor failure, system malfunction | Unplug for 10 minutes, then restart. If persists, contact service |
| Hot air from exhaust | Normal operation, exhaust hose too long | This is normal. Ensure exhaust hose is not longer than recommended length |
Error Codes
- E1: Room temperature sensor error - Check sensor connection
- E2: Evaporator temperature sensor error - Contact service center
- E3: Water tank full - Empty the water collection tank
- E4: Overheat protection - Allow unit to cool, check air flow
- E5: Communication error - Unplug and restart the unit
- E6: Fan motor error - Check for obstructions, contact service
Manual Downloads
Current Model Manuals
PAC EX130
13,000 BTU Portable AC
PAC AN110
11,000 BTU Silent AC
PAC N82
8,200 BTU Eco AC
PAC T110
11,000 BTU Heat/Cool
Popular Previous Models
PAC C90
9,000 BTU Portable AC
PAC N77
7,700 BTU Silent AC
PAC EL98
9,800 BTU Eco AC
PAC T85
8,500 BTU Heat/Cool