Installation Guide
Tools Needed:
- Drill with hole saw attachment
- Level
- Screwdrivers (flat and Phillips)
- Tape measure
- Caulking gun
Step-by-Step Installation
- Choose Installation Location: Select a location near an electrical outlet on an exterior wall with proper support.
- Prepare Window Opening: Clean window area and ensure proper measurements for the air conditioner unit.
- Install Mounting Brackets: Secure mounting brackets to the window sill according to manufacturer specifications.
- Place Air Conditioner: Carefully place the air conditioner unit onto the mounting brackets.
- Seal Gaps: Use foam insulation strips to seal gaps between the unit and window frame to prevent air leaks.
- Electrical Connection: Connect to a properly grounded 115V, 60Hz, dedicated circuit outlet. Do not use an extension cord.
- Test Operation: Turn on the air conditioner and test all functions including cooling, fan speeds, and thermostat settings.
Specifications
| Model Series | AEM10AX |
| Type | Window Air Conditioner |
| Color | White |
| Cooling Capacity | 10,000 BTU |
| Room Size Coverage | Up to 450 sq. ft. |
| Noise Level | 52 dB |
| Control Type | Electronic Controls with Remote |
| Energy Rating | Energy Star Certified |
| Energy Efficiency Ratio (EER) | 11.9 |
| Power Requirements | 115V, 60Hz, 8.7A |
| Dimensions (HxWxD) | 15.5 x 24 x 19.5 inches |
| Weight | 68 lbs |
| Air Flow | 350 CFM |
Warranty Information
- Full Warranty: 1 year parts and labor
- Sealed System Warranty: 5 years on compressor and cooling components
- Additional Coverage: Optional extended warranty available
For warranty service, contact GE Customer Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
Energy Star Certified
Meets strict energy efficiency guidelines set by the EPA, saving you money on energy bills while helping protect the environment.
Remote Control
Convenient remote control allows you to adjust temperature, fan speed, and mode settings from across the room.
3 Cooling & 3 Fan Speeds
Multiple cooling and fan speed settings allow you to customize your comfort level based on room conditions and personal preference.
24-Hour Timer
Program the unit to turn on or off at specific times, helping to save energy and ensure your room is comfortable when you need it.
Sleep Mode
Automatically adjusts temperature throughout the night for optimal comfort and energy savings while you sleep.
Easy-to-Clean Filter
Washable mesh filter captures dust and particles from the air, improving air quality and making maintenance simple.
Operating Modes Explained
Cool Mode
Standard cooling operation with adjustable temperature settings for optimal comfort
Energy Saver
Fan and compressor cycle off when desired temperature is reached to save energy
Fan Only
Circulates air without cooling, perfect for mild days or improving air circulation
Auto Mode
Automatically switches between cooling and fan modes based on room temperature
Dry Mode
Reduces humidity in the room for added comfort on humid days
Sleep Mode
Gradually increases temperature overnight for energy savings and comfort
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Air conditioner won't start | Power issue, thermostat setting, timer active | Check power supply, adjust thermostat, check timer settings |
| Poor cooling performance | Dirty filter, blocked airflow, incorrect size for room | Clean filter, clear obstructions, ensure proper room size match |
| Water leaking inside | Improper installation angle, clogged drain | Check installation angle, ensure proper drainage |
| Unusual noises | Loose parts, debris in fan, vibration | Tighten mounting, clear debris, check for proper installation |
| Remote control not working | Dead batteries, obstruction, distance too far | Replace batteries, clear line of sight, move closer to unit |
| Unit cycles on and off frequently | Dirty filter, thermostat location, extreme outdoor temps | Clean filter, check thermostat placement, consider external factors |
Indicator Lights
- Green Light: Normal operation - Unit is functioning properly
- Flashing Green Light: Timer active - Unit will turn on/off as programmed
- Yellow Light: Filter reminder - Time to clean the air filter
- Red Light: Error condition - Check for obstructions or power issues
- Flashing Red Light: System error - Contact service center
- No Lights: Power issue - Check electrical connection and circuit breaker
Manual Downloads
Current Model Manuals
AEM10AX
10,000 BTU Window AC
AEM08AX
8,000 BTU Window AC
AEM12AX
12,000 BTU Window AC
AEM15AX
15,000 BTU Window AC
Popular Previous Models
AEM10AF
10,000 BTU Window AC
AEM08AD
8,000 BTU Window AC
AEM12AS
12,000 BTU Window AC
AEM05AX
5,000 BTU Window AC