Installation Guide
Tools Needed:
- Adjustable wrench set
- Pipe thread sealant
- Screwdrivers (flat and Phillips)
- Level
- Air hose fittings
Step-by-Step Installation
- Choose Installation Location: Select a clean, dry, well-ventilated area with sufficient clearance for maintenance access.
- Prepare the Foundation: Place on a solid, level concrete floor capable of supporting the compressor's weight.
- Electrical Connection: Connect to a dedicated 240V, 60Hz circuit with proper grounding. Consult local electrical codes.
- Air System Setup: Install air lines using appropriate pipe size, ensuring proper slope for condensation drainage.
- Drain Installation: Connect drain line to tank drain valve and route to suitable drainage location.
- Pressure Settings: Adjust pressure switch cut-in and cut-out settings according to application requirements.
- Initial Startup: Fill with recommended compressor oil, check all connections, and perform initial test run.
Specifications
| Model Series | C601H |
| Type | Stationary Air Compressor |
| Color | Black / Orange |
| Tank Capacity | 60 Gallons |
| Noise Level | 78 dB |
| Control Type | Pressure Switch with Magnetic Starter |
| Motor Power | 5 HP |
| Air Delivery | 15.5 CFM @ 90 PSI |
| Max Pressure | 175 PSI |
| Power Requirements | 240V, 60Hz, Single Phase |
| Dimensions (HxWxD) | 65 x 30 x 30 inches |
| Weight | 285 lbs |
| Pump Type | Two-Stage Cast Iron |
Warranty Information
- Full Warranty: 2 years parts and labor
- Tank Warranty: Lifetime limited warranty
- Pump Warranty: 3 years
For warranty service, contact Husky Customer Service at 1-800-431-1700 or visit HuskyTools.com
Key Features
Two-Stage Pump
Advanced two-stage pump design provides higher efficiency and cooler operation, delivering more air with less energy consumption.
ASME Certified Tank
60-gallon ASME certified tank with lifetime warranty ensures safety and durability for industrial applications.
Magnetic Starter
Built-in magnetic starter provides overload protection and allows for remote control operation capabilities.
Low Oil Shutdown
Automatic shutdown feature protects the pump from damage when oil levels fall below minimum requirements.
Thermal Overload Protection
Motor includes thermal overload protection to prevent damage from overheating during extended operation.
Industrial-Grade Components
Features industrial-grade pressure switch, check valve, and safety valve for reliable performance in demanding environments.
Performance Specifications
Air Delivery
15.5 CFM @ 90 PSI for continuous tool operation
Duty Cycle
100% duty cycle for continuous industrial use
Recovery Time
Quick recovery from 90 to 175 PSI in under 2 minutes
Oil Capacity
64 oz synthetic compressor oil capacity
Outlet Configuration
Dual 1/2" NPT outlets for multiple tool connections
Pressure Regulation
Precise pressure regulation from 40-175 PSI
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Compressor won't start | Power issue, pressure switch fault, thermal overload tripped | Check power supply, reset thermal overload, inspect pressure switch |
| Low air pressure | Air leaks, worn pump rings, clogged intake filter | Check for leaks, inspect pump, clean or replace air filter |
| Excessive noise/vibration | Loose components, worn bearings, improper mounting | Tighten all fasteners, check bearings, ensure proper installation |
| Overheating | Dirty cooling fins, low oil, restricted ventilation | Clean cooling fins, check oil level, improve ventilation |
| Oil in air lines | Worn piston rings, overfilled oil, faulty separator | Check piston rings, adjust oil level, inspect separator |
| Slow recovery time | Worn valves, leaking check valve, undersized piping | Inspect valves, check for leaks, verify pipe sizing |
Maintenance Codes & Indicators
- Red Light: Thermal overload - Allow to cool and reset
- Yellow Light: Low oil warning - Check and refill oil
- Flashing Green: Normal operation - Compressor running
- Solid Green: Standby mode - Tank at pressure
- No Lights: Power issue - Check electrical connection
- Beeping Alarm: High temperature - Check ventilation and cooling
Manual Downloads
Current Model Manuals
C601H
60 Gal Two-Stage Compressor
C602H
60 Gal Industrial Compressor
C603V
60 Gal Vertical Compressor
C601P
60 Gal Portable Compressor
Popular Previous Models
C551H
55 Gal Air Compressor
C801H
80 Gal Two-Stage Compressor
C452V
45 Gal Vertical Compressor
C301P
30 Gal Portable Compressor