Installation Guide
Tools Needed:
- Adjustable wrench set
- Pipe wrench
- Screwdrivers (flat and Phillips)
- Level
- Teflon tape
- Pressure gauge
Step-by-Step Installation
- Choose Installation Location: Select a clean, dry, well-ventilated area with solid, level flooring and adequate clearance for maintenance.
- Uncrate and Position: Remove all packaging materials and shipping blocks. Position compressor on a level surface using proper lifting equipment.
- Electrical Connection: Connect to a dedicated 240V, 60Hz circuit with proper grounding. Consult local electrical codes for proper installation.
- Air System Setup: Install air filter on intake, connect air lines using appropriate fittings, and ensure all connections are tight and leak-free.
- Drain Installation: Connect drain line to tank drain valve and route to appropriate drainage location.
- Pressure Settings: Set cut-in and cut-out pressures according to manufacturer specifications using pressure switch adjustment.
- Initial Startup: Fill with recommended compressor oil, check all connections, and perform initial test run following startup procedure.
Specifications
| Model Series | C602H |
| Type | Vertical Tank Air Compressor |
| Color | Black/Orange |
| Tank Capacity | 60 Gallons |
| Noise Level | 78 dB |
| Control Type | Pressure Switch with Magnetic Starter |
| Motor Type | 5 HP, 230V Single Phase |
| Air Delivery | 15.8 CFM @ 90 PSI |
| Max Pressure | 175 PSI |
| Power Requirements | 230V, 60Hz, 24A |
| Dimensions (HxWxD) | 72 x 24 x 30 inches |
| Weight | 285 lbs |
| Pump Type | Two-Stage Cast Iron |
Warranty Information
- Full Warranty: 2 years parts and labor
- Tank Warranty: Lifetime limited warranty
- Pump Warranty: 3 years on cast iron pump
- Additional Coverage: Optional extended warranty available
For warranty service, contact Husky Customer Service at 1-800-431-1700 or visit HuskyTools.com
Key Features
Two-Stage Pump
Industrial-grade two-stage cast iron pump provides higher efficiency, cooler operation, and longer life compared to single-stage compressors.
ASME Certified Tank
60-gallon ASME certified tank meets strict safety standards and features a lifetime warranty for peace of mind and durability.
Magnetic Starter
Professional magnetic starter provides overload protection and allows for remote control operation with low voltage controls.
Low Oil Shutdown
Automatic shutdown feature protects the pump from damage when oil levels fall below safe operating levels.
Thermal Overload Protection
Built-in thermal protection prevents motor damage from overheating during extended operation or high ambient temperatures.
Easy Drain System
Convenient ball valve drain allows for easy tank drainage to prevent corrosion and maintain air quality.
Performance Specifications
Air Delivery
15.8 CFM @ 90 PSI provides ample air for multiple tools or continuous operation
Duty Cycle
100% duty cycle allows for continuous operation in industrial applications
Recovery Time
Quick recovery from 90 to 175 PSI for minimal downtime between tasks
Oil Capacity
64 oz oil capacity with sight glass for easy level monitoring
Pressure Control
Adjustable pressure switch with automatic cut-in/cut-out control
Port Configuration
Multiple outlet ports with 1/2" NPT connections for flexible plumbing
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Compressor won't start | Power issue, pressure switch fault, thermal overload tripped | Check power supply, reset thermal overload, inspect pressure switch |
| Low pressure output | Air leaks, worn valves, intake filter clogged | Check for leaks, inspect valves, clean or replace air filter |
| Excessive noise/vibration | Loose components, worn bearings, improper mounting | Tighten all fasteners, check bearings, ensure proper installation |
| Overheating | Low oil, dirty cooling fins, restricted ventilation | Check oil level, clean cooling fins, improve ventilation |
| Oil in air lines | Worn piston rings, overfilled oil, faulty separator | Check piston rings, adjust oil level, inspect separator element |
| Frequent cycling | Air leaks, large demand, faulty check valve | Locate and repair leaks, check system demand, inspect check valve |
Error Indicators
- Red Light - Thermal Overload: Motor overheating - Allow to cool, check ventilation
- Yellow Light - Low Oil: Oil level below minimum - Add recommended compressor oil
- No Power Light: Electrical issue - Check circuit breaker and power supply
- Continuous Running: Air leak or faulty pressure switch - Check for leaks, adjust pressure switch
- Knocking Sound: Mechanical issue - Check connecting rods and bearings
- Slow Pressure Build: Worn components - Check valves, rings, and gaskets
Manual Downloads
Current Model Manuals
C602H
60 Gallon Vertical Compressor
C603H
60 Gallon Horizontal Compressor
C602HV
60 Gallon Vibration Mounted
C602HS
60 Gallon Silent Series
Popular Previous Models
C601H
60 Gallon Single Stage
C602P
60 Gallon Portable
C580H
80 Gallon Industrial
C540H
40 Gallon Compact