Installation Guide
Tools Needed:
- Adjustable wrench
- Air pressure gauge
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a clean, dry, well-ventilated area with adequate space around the compressor for proper airflow.
- Unpack and Inspect: Remove all packaging materials and inspect the compressor for any shipping damage.
- Position the Compressor: Place on a flat, level surface that can support the weight of the compressor when fully loaded.
- Check Oil Level: Verify the oil level is at the proper mark on the sight glass before first use.
- Electrical Connection: Connect to a properly grounded 120V, 15A, AC only outlet. Use a dedicated circuit if possible.
- Connect Air Hose: Attach air hose to the quick-connect coupler using appropriate thread sealant.
- Pressure Settings: Set the pressure regulator to desired output pressure (typically 90-120 PSI for most tools).
- Initial Run: Run the compressor without load for 10-15 minutes to break in the pump.
Specifications
| Model Number | C202H |
| Type | Portable Electric Air Compressor |
| Color | Red/Black |
| Tank Capacity | 20 Gallon |
| Noise Level | 78 dB |
| Control Type | Pressure Switch with Manual Controls |
| Motor Power | 1.6 HP |
| Max Pressure | 150 PSI |
| CFM at 40 PSI | 5.0 CFM |
| CFM at 90 PSI | 4.0 CFM |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 24 x 20 x 32 inches |
| Weight | 85 lbs |
| Pump Type | Oil-Lubricated Single Stage |
Warranty Information
- Full Warranty: 1 year parts and labor
- Pump Warranty: 2 years on compressor pump
- Tank Warranty: Lifetime limited warranty on ASME tank
For warranty service, contact Husky Customer Service at 1-800-430-3376 or visit HuskyTools.com
Key Features
ASME Certified Tank
20-gallon ASME certified air tank provides ample air storage for continuous tool operation with reduced motor cycling.
Oil-Lubricated Pump
Durable oil-lubricated pump design ensures longer life, better heat dissipation, and quieter operation compared to oil-free models.
Thermal Overload Protection
Built-in thermal overload protection automatically shuts off the motor if it overheats, preventing damage and ensuring safety.
Quick-Release Coupler
Industrial-style quick-release air coupler allows for fast, secure connection of air tools without tools or wrenches.
Pressure Regulator with Gauge
Precise pressure regulator with easy-to-read gauge allows you to dial in exact pressure for each specific tool or application.
Portable Design
Heavy-duty wheels and folding handle make it easy to move the compressor around your workshop or job site.
Recommended Applications
Nail Guns
Ideal for framing, finish, and brad nailers (70-120 PSI)
Impact Wrenches
Powerful enough for automotive and construction impact tools
Spray Painting
Consistent pressure for HVLP and conventional spray guns
Air Ratchets
Perfect for mechanical work and automotive repair
Inflating
Tires, sports equipment, inflatable toys and pools
Cleaning
Blow guns for workshop cleaning and debris removal
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Compressor won't start | Power issue, pressure switch fault, thermal overload | Check power supply, reset thermal overload, check pressure switch |
| Low pressure output | Leaking fittings, worn pump rings, clogged intake filter | Check for leaks, clean/replace intake filter, inspect pump |
| Excessive cycling | Air leaks, faulty check valve, worn pump | Check for leaks, test check valve, inspect pump components |
| Oil in air lines | Overfilled oil, worn piston rings | Check oil level, replace piston rings if necessary |
| Unusual noises | Loose components, worn bearings, lack of lubrication | Tighten all fasteners, check bearings, ensure proper oil level |
| Motor overheating | Restricted airflow, low voltage, excessive cycling | Clean cooling fins, check voltage supply, reduce load demand |
Maintenance Schedule
- Daily: Drain moisture from tank, check oil level
- Weekly: Check for air leaks, clean intake filter
- Monthly: Inspect hoses and fittings, check belt tension
- Every 3 Months: Change oil (or per manufacturer recommendation)
- Annually: Inspect safety valve, check pump components
- As Needed: Replace air filter, check valve, pressure switch
Manual Downloads
Current Model Manuals
C202H
20-Gallon Portable Air Compressor
C302H
30-Gallon Air Compressor
C602V
60-Gallon Vertical Air Compressor
C802V
80-Gallon Two Stage Compressor
Popular Previous Models
C201H
20-Gallon Horizontal Compressor
C152H
15-Gallon Portable Compressor
C402V
40-Gallon Vertical Compressor
C1002V
100-Gallon Industrial Compressor