Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Teflon tape
- Air hose fittings
Step-by-Step Installation
- Choose Installation Location: Select a clean, dry, well-ventilated location with adequate clearance for maintenance and operation.
- Position the Compressor: Place on a solid, level floor capable of supporting the compressor's weight when fully loaded.
- Check Oil Level: Verify oil level is at the proper mark on the sight glass before first use.
- Electrical Connection: Connect to a properly grounded 120V, 15A, 60Hz outlet with correct circuit protection. Use only 12-gauge extension cords if needed.
- Air System Setup: Install air filter on intake, connect air hose to outlet using Teflon tape on threads.
- Pressure Settings: Set cut-out pressure to 155 PSI and cut-in pressure to 135 PSI (factory preset).
- Test Run: Run compressor without load for 30 minutes to break in, then check for leaks and proper operation.
Specifications
| Model Number | 0300816 |
| Type | Electric Vertical Air Compressor |
| Color | Black/Orange |
| Tank Capacity | 30 Gallons |
| Noise Level | 78 dB |
| Motor Type | Oil-Lubricated Pump |
| Maximum Pressure | 155 PSI |
| CFM at 90 PSI | 6.5 SCFM |
| CFM at 40 PSI | 8.2 SCFM |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 50 x 24 x 24 inches |
| Weight | 180 lbs |
| Horsepower | 2.0 HP |
Warranty Information
- Full Warranty: 1 year parts and labor
- Tank Warranty: 5 years against defects
- Pump Warranty: 2 years limited warranty
For warranty service, contact Husky Customer Service at 1-800-431-8150 or visit HuskyTools.com
Key Features
Oil-Lubricated Pump
Durable oil-lubricated pump design provides longer life, cooler operation, and quieter performance compared to oil-free compressors.
ASME Certified Tank
30-gallon ASME certified air tank with maximum working pressure of 155 PSI for reliable and safe operation.
Thermal Overload Protection
Built-in thermal overload protection automatically shuts off motor if it overheats, preventing damage and extending motor life.
Dual Voltage Capability
Can be converted to 240V operation for improved efficiency and reduced amp draw in permanent installations.
Large Control Panel
Easy-to-read gauges show tank pressure and regulated pressure, with convenient regulator knob and safety valve.
Quick Recovery Time
Rapid recovery from 135 PSI to 155 PSI in approximately 45 seconds for continuous tool operation.
Recommended Applications
Air Tools
Ideal for impact wrenches, ratchets, drills, and sanders
Spray Painting
Consistent pressure for HVLP and conventional spray guns
Inflating
Tires, sports equipment, air mattresses, and pool toys
Nailing/Stapling
Framing nailers, finish nailers, and staplers
Cleaning
Blow guns for workshop cleaning and debris removal
Air Brushing
Detailed work with proper pressure regulation
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Compressor won't start | Power issue, pressure switch fault, thermal overload tripped | Check power supply, reset thermal overload, check pressure switch |
| Low pressure output | Leaks in system, worn piston rings, clogged intake filter | Check for leaks, clean/replace air filter, inspect pump |
| Excessive noise/vibration | Loose components, worn bearings, improper mounting | Tighten all bolts, check motor mounts, ensure level installation |
| Oil in air lines | Overfilled oil, worn piston rings, wrong oil type | Check oil level, use proper compressor oil, inspect pump |
| Motor overheats | Dirty cooling fins, low voltage, excessive cycling | Clean cooling fins, check voltage, allow proper cool down |
| Slow recovery time | Worn valves, leaking check valve, undersized wiring | Check pump valves, inspect check valve, verify adequate power supply |
Maintenance Schedule
- Daily: Drain moisture from tank, check oil level
- Weekly: Inspect for leaks, clean intake filter
- Monthly: Check belt tension, tighten fasteners
- Every 3 Months: Change oil (or 500 hours)
- Every 6 Months: Inspect safety valve, clean cooling fins
- Annually: Complete system inspection, replace air filter
Manual Downloads
Current Model Manuals
0300816
30-Gallon Vertical Compressor
0300817
30-Gallon Horizontal Compressor
0300818
60-Gallon Two-Stage Compressor
0300819
20-Gallon Portable Compressor
Popular Previous Models
0300716
27-Gallon Vertical Compressor
0300616
33-Gallon Oil-Free Compressor
0300516
30-Gallon Belt Drive Compressor
0300416
26-Gallon Pancake Compressor