Installation Guide
Requirements:
- Compatible Midea Air Conditioner
- 2 x AAA batteries
- Clear line of sight to AC unit
- Distance within 8 meters
Step-by-Step Setup
- Battery Installation: Open the battery compartment on the back of the remote and insert 2 AAA batteries with correct polarity.
- Remote Pairing: Point the remote directly at your Midea air conditioner and press any button to establish connection.
- Initial Setup: Set the current time and date using the clock button and settings menu.
- Mode Selection: Familiarize yourself with the different operation modes: Cool, Heat, Fan, Dry, and Auto.
- Temperature Calibration: Ensure the remote displays accurate room temperature by placing it away from direct heat sources.
- Function Testing: Test all basic functions including power on/off, temperature adjustment, and fan speed control.
- Advanced Settings: Configure timer settings, sleep mode, and energy saving features according to your preferences.
Specifications
| Model Series | MRC-27C6 |
| Type | Infrared Remote Control |
| Color | White / Black |
| Compatibility | Most Midea AC models 2015-2023 |
| Operating Range | Up to 8 meters |
| Display Type | LCD with backlight |
| Battery Type | 2 x AAA (included) |
| Battery Life | Approximately 12 months |
| Dimensions | 15.5 x 5.5 x 2 cm |
| Weight | 85g (with batteries) |
| Operating Temperature | 0°C to 50°C |
| Warranty Period | 1 year |
Warranty Information
- Full Warranty: 1 year from date of purchase
- Coverage: Manufacturing defects and component failure
- Exclusions: Battery leakage, physical damage, water damage
For warranty service, contact Midea Customer Service at 1-800-288-8612 or visit Midea.com/support
Key Features
LCD Display with Backlight
Clear digital display shows current settings, temperature, and mode. Built-in backlight allows easy viewing in dark conditions.
Multi-Function Control
Complete control over temperature, fan speed, mode selection, timer settings, and special functions like sleep mode and turbo cooling.
Auto-Swing Function
Automatically adjusts the air flow direction for optimal room temperature distribution and comfort.
Energy Saving Mode
Intelligent energy saving function automatically adjusts cooling/heating to maintain comfort while reducing power consumption.
24-Hour Timer
Program on/off times up to 24 hours in advance for automatic operation and energy efficiency.
Sleep Mode
Gradually adjusts temperature throughout the night for optimal sleeping conditions and energy savings.
Operation Modes Explained
Cool Mode
Standard cooling operation with adjustable temperature and fan speed settings
Heat Mode
Heating operation for winter use with temperature control and anti-cold draft feature
Dry Mode
Dehumidification function that removes excess moisture while maintaining room temperature
Fan Mode
Air circulation only without cooling or heating, with multiple fan speed options
Auto Mode
Intelligent mode that automatically selects cooling or heating based on room temperature
Turbo Mode
Maximum cooling/heating power for rapid temperature adjustment
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not working | Dead batteries, blocked signal, wrong angle | Replace batteries, ensure clear line of sight, point directly at AC unit |
| Display is blank | Battery issue, battery installed incorrectly | Check battery polarity, replace with new batteries |
| AC not responding | Out of range, signal interference, AC power issue | Move closer to AC, check AC power supply, remove obstacles |
| Buttons not functioning | Button stuck, liquid damage, internal circuit issue | Clean buttons, check for spills, contact service center |
| Incorrect temperature reading | Remote placed near heat source, sensor issue | Place remote in central room location, away from windows/heaters |
| Backlight not working | Backlight disabled, power saving mode, LED failure | Check settings, press light button, contact service if LED failed |
Common Error Indicators
- Low Battery Icon: Replace both AAA batteries immediately
- No Signal: Ensure you're within 8 meters with clear line of sight
- Temp Flashing: Temperature sensor issue - contact service
- Mode Error: Selected mode not available on your AC model
- Timer Conflict: Check timer settings for overlapping on/off times
- Reset Required: Remove batteries for 5 minutes then reinsert
Manual Downloads
Current Model Remotes
MRC-27C6
Universal LCD Remote
MRC-28B4
Advanced Smart Remote
MRC-25A9
Basic Function Remote
MRC-30D1
Wi-Fi Enabled Remote
Popular Previous Models
MRC-22X3
2019 Model Remote
MRC-20W8
2017 Standard Remote
MRC-18V5
2015 Basic Remote
MRC-24Z7
2021 Premium Remote