Installation Guide
Requirements:
- Mitsubishi Air Conditioner Unit
- 2 x AAA Batteries
- Clear line of sight to AC unit
- Operating distance within 7 meters
Step-by-Step Setup
- Battery Installation: Open battery compartment on back of remote and insert 2 AAA batteries, observing correct polarity.
- Remote Pairing: Point remote at AC unit and press POWER button to establish connection.
- Initial Setup: Set current time and date using TIME SET button for scheduled operations.
- Mode Selection: Choose desired operation mode (Cool, Heat, Dry, Fan, Auto) using MODE button.
- Temperature Setting: Use TEMP ▲▼ buttons to set desired room temperature.
- Fan Speed Adjustment: Select appropriate fan speed (Auto, Low, Medium, High) using FAN button.
- Test Operation: Verify all functions work properly with AC unit response.
Specifications
| Model Series | PAR-40MAA / PAR-33MAA |
| Type | Infrared Remote Control |
| Color | White / Silver |
| Compatibility | Most Mitsubishi Electric AC Models |
| Operating Range | Up to 7 meters |
| Display Type | LCD with Backlight |
| Battery Type | 2 x AAA (1.5V) |
| Battery Life | Approximately 1 year (normal use) |
| Dimensions (HxWxD) | 15.5 x 5.5 x 2.2 cm |
| Weight | 85 g (including batteries) |
| Operating Temperature | 0°C to 50°C |
| Languages Supported | English, French, Spanish |
Warranty Information
- Remote Control Warranty: 1 year parts and labor
- Battery Warranty: 90 days from purchase
- Replacement Policy: Defective remotes replaced within warranty period
For warranty service, contact Mitsubishi Electric Customer Service at 1-800-433-4822 or visit MitsubishiElectric.com
Key Features
LCD Display with Backlight
Clear LCD screen with automatic backlight illumination for easy viewing in dark conditions, showing all settings and operations clearly.
Multi-Function Control
Complete control over temperature, fan speed, operation mode, timer settings, and special functions from a single remote unit.
Timer Functions
24-hour programmable timer for ON/OFF operations, allowing energy-saving scheduling and comfort optimization.
Sleep Mode
Automatic temperature adjustment during sleep hours for optimal comfort and energy efficiency throughout the night.
Powerful IR Transmission
High-intensity infrared signal ensures reliable operation even at maximum distance or with minor obstructions.
Energy Saving Mode
ECO mode optimizes compressor operation and fan speed to reduce energy consumption while maintaining comfort.
Operation Modes Explained
Cool Mode
Standard cooling operation with adjustable temperature and fan speed settings
Heat Mode
Heating operation for winter use with temperature control and anti-cold draft feature
Dry Mode
Dehumidification function that removes excess moisture without overcooling the room
Fan Mode
Air circulation only without cooling or heating, with adjustable fan speeds
Auto Mode
Automatic selection of cooling or heating based on room temperature
Quiet Mode
Reduced fan speed and compressor noise for nighttime or quiet environment operation
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not working | Dead batteries, blocked signal, wrong angle | Replace batteries, ensure clear line of sight, point directly at AC unit |
| AC not responding | Out of range, signal interference, AC power issue | Move closer to AC, remove obstacles, check AC power supply |
| Display dim or blank | Low batteries, backlight off, display issue | Replace batteries, press LIGHT button, reset remote |
| Buttons not responding | Battery corrosion, button damage, remote malfunction | Clean battery contacts, check for physical damage, contact service |
| Incorrect temperature reading | Remote sensor issue, placement problem | Reset remote, ensure remote is in room (not in direct sunlight) |
| Timer not functioning | Incorrect time setting, programming error | Reset time, reprogram timer following manual instructions |
Error Codes Displayed
- E1: Room temperature sensor error - Check sensor connection
- E2: Remote communication error - Check batteries and line of sight
- E3: Drain pump error - Contact service technician
- E4: Protection device activated - Wait 3 minutes and retry
- E5: Overload protection - Reduce cooling/heating load
- E6: Compressor error - Contact authorized service center
Manual Downloads
Current Remote Models
PAR-40MAA
Universal Remote with Backlight
PAR-33MAA
Basic Function Remote
PAR-F27MEA
Wall Controller Remote
PAR-31MAA
Compact Remote Control
Compatible AC Series
MSZ Series
Wall Mounted Units
MLZ Series
Ceiling Mounted Units
MXZ Series
Multi-Zone Systems
PEAD Series
Ducted Units